FUTABA GY701 - Page 48

G
OVERNOR
B
ASIC
S
ETTING
48
(6) Governor on/off switch [default: Inhibit]
It selects the governor activate switch if addi-
TIONALSWITCHISUSED0USHINGTHE3%4$ATA
key activates the function. The on/off direction
ISCHANGEDBYPUSHINGTHE3%4KEYAGAIN4HE
FUNCTIONISINHIBITEDBYPUSHINGTHE23%4$ATA
key. This function is only available at S.Bus con-
nection. “Invalid” is displayed at PWM connec-
tion.
Invalid display
(at PWM)
When governor turned on and off by switch
(S.BUS connection only)
Setting the switch to the ON position turns on
the governor. The following describes this op-
eration.
Governor can be turned
on and off by a switch.
s3WITCHSETTOONPOSITIONANDENGINERUNNINGAT
ORMOREOFSETSPEED

ON
s4HROTTLESTICKSETTOMAXIMUMSLOW
position

2EMAINS/.
s3WITCHSETTOOFFPOSITION

OFF