FUTABA GY701 - Gyro Expert Setting

G
YRO
E
XPERT
S
ETTING
65
This sets the detail of the gyro function for the ex-
pert modeler. Push the mode + or – key for more
than one second on the Gyro Basic menu, to go
into the Gyro Expert menu. Push mode + or – key
for more than one second again on the Gyro Ex-
pert menu to be returned to the Gyro Basic menu.
(1) Start display
Push mode + or – key, the editing menu will
scroll. Pushing mode + or – key for more than one
second to go, back to the gyro basic menu.
(2) Rudder servo neutral setting
default: 0 uS
ranges: -140
〜
+140 uS
This sets the neutral position of the rudder servo.
Pushing data+ or – key, the neutral position of the
rudder servo is moved.
(3) Gyro basic gain
default: 100 %
ranges: 50
〜
120 %
This sets the gyro fundamental gain. By pushing
the data+ or – key, the value is changed.