FUTABA GYA460 - Page 19

19
2.GYROsetting
TheparameterscanbesetbyGYA460
SETbutton.
① TurnontheGYA460power.
② PresstheGYA460SETbuttonforat
least2secondstoenterthesetting
mode.
※ Whenthesettingmodeisentered,
LED1lightsblue.
③WhentheSETbuttonispressed,
thecolorofLED1changesandthe
settingitemchanges.
④WhentheSETbuttonisdouble
clicked,thecolorofLED2changes
andthesettingischanged.
⑤WhentheSETbuttonispressed
foratleast2seconds,thesetting
modeends.