FUTABA GYA460 - Page 22

22
①Settheaileron,elevator,andrudder
gyrogaintrimmerstoabout45˚.
②Inthestateinwhichthegyrosare
operative,movethetransmitter
sticksandcheckthateachcontrol
surfacemovesintheproper
direction.Ifacontrolsurfacemoves
intheoppositedirectionofstick
operation,settransmitterreverse.
③Withoutanytransmitterinput,turn
themodelontheaileron,elevator,
andrudderrotatingaxisdirection
andcheckifeachcontrolsurface
movesinthedirectionopposite
therotatingdirection(direction
inwhichtheplanereturns).Ifthe
directionofthesteeringangle
correctionrudderisreversed,
changethetrimmerto45˚ofthe
oppositeside.
PRE-FLIGHT SETTING