FUTABA R334SBS - Software Update Changes Version 3.0; Wireless MC970 CR Parameter Setting; Software Update Changes Version 2.0; Wireless S.BUS Setting Function

R334SBS/R334SBS-E SOFTWARE UPDATE CHANGES
Version: 3.0
R334SBS/R334SBS-E SOFTWARE UPDATE CHANGES
Version: 2.0
1.CompatiblewithWirelessS.BUSsettingfunction
1.CompatiblewithWirelessMC970CRparameterssettingfunction
TheoperatingparametersoftheFutabaprogrammableS.BUS2servoconnectedtoreceivercanbesetand
changedfromthetransmitterwirelessly.
TheoperatingparametersoftheFutabaMC970CRconnectedtoreceivercanbesetandchangedfromthe
transmitterwirelessly.
*Transmitter (T7PX) also needs to be updated to version 2.0.
*Please refer to the update manual of the T7PX transmitter (Ver.2.0) for how to use the wireless S.BUS
setting.
*Transmitter (T7PX/T7XC) also needs to be updated to version 3.0.
-5-
FUTABA CORPORATION
oak kandakajicho 8F 3-4 Kandakajicho, Chiyoda-ku, Tokyo 101-0045, Japan
TEL: +81-3-4316-4820, FAX: +81-3-4316-4823
©FUTABA CORPORATION 2018, 9 (1)
ųƄƕƄƐƈƗƈƕŃŶƈƗƗƌƑƊ
ųƄƕƄƐƈƗƈƕŃŶƈƗƗƌƑƊ
ŶőťŸŶŕ
ŶťŰŐŔ
ŰŦŜŚœŦŵ
SBM-1
LINK Rx
S.BUS MotorController Module