FUTABA R334SBS - Wait for Update Completion; Disconnect Hardware; Verify Functions; Error Handling

-4-
Don'tturnoffthepower!
Waitforabout2minutes.
Greensteadylight
R334SBS/R334SBS-E
Completed
8.
 TurnoffthepowerswitchofyourreceiverandremovetheCIU-3/CIU-2.
9.
Besuretocheckeachfunctionbeforeuse.
Error
1.
Ifanerrordisplayappears,replaceanwiththeupdatefromthebeginning.
◆Thereceiverisnotintheupdate"ready".
◆Thecableisdisconnected.
◆Thepowerhasbeenturnedoff.