FUTABA SkyLeaf BP - Page 19

19
12
SkyLeafTip
ŤƖŃƗƋƈŃ ƈƑƊƌƑƈŃ ƙƌƅƕƄƗƈƖŏŃƗƌƊƋƗƈƑŃ
ƈƄƆƋŃƖƆƕƈƚŃƗƌƊƋƗƏƜő
Setscrew
Throttleadjuster
Washer
Servohorn
Washer
M2NylonNut
11
Silicontube
Pressurepipe
Weight
Airtube
Fueltank
Fuelstopper/Fillerneck
Putoutoutside
Tocarburetor
Nipple
ũƘƖƈƏƄƊƈŃƉƕƒƑƗŃƅƒƗƗƒƐ
● Adjustthethrottlestroke.Donotoverload
thethrottleservo.
● Applyepoxyglueor
clearpainttothecutof
thewoodaftercutting.
Donotletfuelinfiltrate.
● Screwtheinstallationbandof
thesilencertothewoodpart
insidethefuselage.
When using interior silencer
Futaba and O.S. do not sell interior silencer.
1
This page is an explanation of when to make it into an engine.
(It is unnecessary in case of EP.)
● Linkservowithenginethrottle.Makeitwork
smoothly.
● Drillaholewhere
ThrottleRod
operatessmoothly.
● Attachingthe
crankofThrottle
Rodisdoneby
removingthe
throttlearmfrom
theengine.
IftheRodisincontactwiththemetalpartofthe
engine,noisemayoccurduetovibrationand
thereisadangerofmalfunction.
● Cuttheexcessrodafter
adjustingthelength.
10
● Pipingoffuelisdone.
آ ŷƋƌƖŃƉƌƊƘƕƈŃ ƌƖŃƄƑŃƈƛƄƐƓƏƈőŃ ųƌƓƌƑƊŃ
ƇƈƓƈƑƇƖŃƒƑŃƗƋƈŃ ƈƑƊƌƑƈőŃųƌƓƈŃ
ƄƆƆƒƕƇƌƑƊŃƗƒŃƗƋƈŃƌƑƖƗƕƘƆƗƌƒƑŃƐƄƑƘƄƏŃ
ƒƉŃƗƋƈŃƈƑƊƌƑƈő
● Cutthisfilmandwood.