17
REFERENCE
Ratings
*Specifications and ratings are subject to change without prior notice.
REFERENCE
TRANSMITTER T4YF
(2 sticks, 4 channels, FM transmitter)
Transmitting frequency: 29, 35, 36, 40, 41,
50, 60, 72, 75 MHz
Modulation method: FM (Frequency Modu-
lation)
Power requirement: 12V (penlight battery
x8) or 9.6V nicd battery
Current drain: 180mA
SERVO S3003/S3004
(Standard servo)
Power requirement: 4.8V or 6V (common
with receiver)
Current drain: 8mA (idle)
Output torque: 3.2kg-cm (4.8V)
Operating speed: 0.23sec/60 degree (4.8V)
Size: 40.4x19.8x36mm
Weight: 37.2g
RECEIVER R136F(not for USA)
(6 channels, FM receiver)
Receiving frequency: 29, 35, 36, 40, 41, 60,
72 MHz
Intermediate frequency: 455kHz
Power requirement: 6V (penlight battery x4)
or 4.8V nicd battery (common with servo)
Current drain: 9.5mA
Size: 33.4x50.3x18.1mm
Weight: 27.8g
RECEIVER R127DF
(7 channels, FM receiver)
Receiving frequency: 50, 60, 72, 75 MHz
Intermediate frequency: 1st IF 10.7MHz, 2nd
IF 455kHz
Power requirement: 4.8 or 6V (common with
servo)
Current drain: 10.0mA
Size: 64.3x35.8x21.0mm
Weight: 40.5g
RECEIVER R148DF
(8 channels, FM receiver)
Receiving frequency: 35, 36, 40, 41, 50, 72
MHz
Intermediate frequency: 1st IF 10.7MHz, 2nd
IF 455kHz
Power requirement: 4.8 or 6V(common with
servo)
Current drain: 13mA
Size: 55.5x25.5x22.5mm
Weight: 30.4g
SERVO S3101
(Micro servo)
Power requirement: 4.8V or 6V (common
with receiver)
Current drain: 8mA (idle)
Output torque: 2.5kg-cm (4.8V)
Operating speed: 0.18sec/60 degree (4.8V)
Size: 28x13x29.7mm
Weight: 17g
To Next Page
Loading...
