FUTABA T26SZ - Page 161

161
ڀ ŪŲŃƗƒŃŷŤťůŨŃŲũŃŦŲűŷŨűŷŶ
GyrosettingGYA553
1.Select“Gyrosetting”onthelastpageof
AirplaneModelMenu
3.Homescreenisdisplayed
ToBasicmenu
◆ WhencopyingdatafromGyroAtoGyroB
ConnectthegyroAtotheT26SZandpress[Start].(EnterthedataofAintoT26SZ)
ConnectGyroBtoT26SZandpress[GYSettingsTransfer].(PutdataonAintogyroB)
2.Select"Start"
Select"Start"

Thiswilldownloadthegyrodatato
theT26SZ.
*Atthistime,ifGyroisnotconnectedto
T26SZbywire,thisscreenappears.
Tap"Yes"todisplaytheGYA553datasaved
inT26SZ.
1
3
2
SETTING
When"GYSettingsTransfer"is
selected,thegyrosettingdatasaved
inT26SZiswrittentothegyro.
IfyoupressStarthere,theBdatawillbedownloadtothe
T26SZandtheAdatawillbelost.