FUTABA T26SZ - Page 231

231
ڀ ŪŲŃƗƒŃŷŤťůŨŃŲũŃŦŲűŷŨűŷŶ
ŲƓƈƕƄƗƌƒƑƖŃƕƈƏƄƗƈƇŃƗƒŃƖƈƕƙƒŃƖƓƈƈƇ
6HUYRVSHHGVHWWLQJ
The servo speed at each function operation
LQFOXGLQJÀLJKWFRQGLWLRQVZLWFKLQJFDQ
be adjusted. The servos operate smoothly
at a fixed speed corresponding to the
set speed. The operating speed (In side)
and return speed (Out side) can be set
individually.
Switch the operation mode according to
the set function.
"Symmetry" mode: Used with ailerons
and other self neutral functions.
"Linear" mode: Used with functions
which hold the operation position of
the throttle and switch channel, etc.
[Setting method]
1. Select the mode ([Linear] or
[Symmetry]). Each time the button is
tapped, it toggles between [Linear]
and [Symmetry].
2. Tap the In or Out Speed button and
set the servo speed.
Initial value: 0
6HWWLQJUDQJHa
（First）0 〜 27（Slowly）
（First）0〜27（Slowly）
Inspeed
Outspeed
IncaseofSymmetry
IncaseofLinear
Outspeed
Inspeed
Symmetry
In
Speed
Out
Speed
In
Speed
Out
Speed
Linear
In
Speed
Out
Speed