FUTABA T6K - Page 6

PC T6K
Error
1.
If an error display appeared, the redo an update from the beginning.
Don't disconnect or remove the battery from
the transmitter during the update.
It is possible that the transmitter can be damaged
if the battery is unplugged during the update.
In the case of a failed update, the transmitter may
not restart. In this situation, try the following steps
to retry the updating procedure:
1. Detach the battery from the transmitter.
2. Attach the battery to the transmitter while pressing
down the "END" button.
3. The update will start.
Even after the above steps, if the transmitter fails to
update or does not start, please have it serviced.
- 6 -