FUTABA TMA-1 User Manual

Thank you for purchasing a Futaba TMA-1 Telemetry
adapter. This TMA-1 displays the telemetry data from
a telemetry receiver on a tablet or smart phone. TMA-
1 is connected on a tablet or smart phone. An exclusive
application is downloaded to the tablet or a smart phone.
Telemetry data can be seen more legible.
Connection Method
Required
Connections and Name of Each Part of the TMA-1
Neither water nor fuel must adhere to TMA-1.
■
As with any electronic components, proper
precautions are urged to prolong the life and
increase the performance of the TMA-1.
Do not use the TMA-1 with anything other than an
R/C model.
An operator must not look at a screen.
■
You may loose sight of the aircraft during
ight and this is extremely dangerous. Have an
assistant on hand to check the screen for you. A
pilot should NEVER take his eyes off his aircraft.
WARNING
● Tablet or smart phone.
The conditions of tablet or smart phone
● FASSTest or T-FHSS telemetry system transmitter and receiver .
● Telemetry sensor .
◆ USB to electric supply is possible. ◆ Dual core ◆ OS ：Android ™ 3.2 ～
◆ Memory：RAM 1GB ～ ROM 16GB ～ ◆ Internet connectivity
Clip holder
OTG (USB On-The-Go) host cable
In Telemetry Receiver
In Telemetry Sensor
The selected Model
TMA-1
Receiver and TMA-1
are made to link.
The power supply of TMA-1 is supplied
from tablet or smart phone.
It has the same setup of
a sensor slot number
in the transmitter.
FASSTest or T-FHSS receiver
The telemetry data of the
altitude, temperature, etc.
displays.
OTG host cable
The application of TMA-1 was installed in
either your tablet or smart phone.
Telemetry Receiver（Option）
● Telemetry Receiver（Option）
SBS-01T,SBS-01TE（Temperature sensor）
SBS-01A（Altitude sensor）
SBS-01RM（Magnet type R.P.M sensor）
SBS-01RO（Optical type R.P.M sensor）
SBS-01G（GPS sensor）
SBS-01V（Voltage sensor）
（2014. 10）
The manual of the application
of a TMA-1 and the application
is downloaded from the WEB
site of Futaba.
TMA-1 ratings
1M23N29802
TMA-1
Cover
Link button
LED
Instruction Manual
TMA-1
Telemetry Adapter
Applicable systems: Futaba FASSTest, T-FHSS Telemetry system
• Size: 2.69 x 1.21 x 0.46 in. (68.3 x 30.8 x 11.6mm)
• Weight: 0.54 oz. (15.4g)
• Current drain: 140mA or less

FUTABA TMA-1 Specifications

General

Type	Radio-Controlled (RC) Model Accessories & Supplies
Product type	-
Certification	CE
Compatibility	SBS-01T, SBS-01TE, SBS-01A, SBS-01RM, SBS-01RO, SBS-01G, SBS-01V
Product color	Black
Connector gender	Male
Quantity per pack	1 pc(s)
Not for children 0-3 years	Yes

Summary

Futaba TMA-1 Telemetry Adapter Overview

Key Components and Connection Method

Explains the overall connection setup and core components like the receiver and OTG cable.

Telemetry Receiver Sensor Options

Lists available sensors like SBS-01T, SBS-01A, etc.

Application Download and Usage

Mentions downloading the app from the web.

TMA-1 Installation and Linking

Physical Attachment Steps

Covers cover removal, connecting cable, and clip holder.

Application and Manual Download Instructions

Accessing the Futaba website for downloads.

Linking Procedures for Transmission Systems

Details for FASSTest and T-FHSS linking.

Important Operational Notes and References

Crucial usage guidelines and references.

TMA-1 System Architecture and Features

System Components and Compatibility

Mentions receivers, sensors, and the general setup.

Connection Diagram Explained

Visual explanation of how the system components connect.

Getting Started with the TMA-1 App

Downloading and Launching the App

Steps to acquire and open the application.

Initial Startup and Icon Identification

Finding and tapping the app icon.

Troubleshooting TMA-1 Connectivity

Resolving Device Connection Issues

General steps for when TMA-1 doesn't work.

Enabling USB Debugging Mode

Specific setting required for connection.

Navigating the TMA-1 Initial Screen

Accessing App Functions from Initial Screen

Explains Monitor, Log, and System Set options.

TMA-1 Monitor Functionality

Monitor Screen Overview and Signal Level

Describes the main display and signal strength indicator.

TMA-1 Sensor Display Configuration

Managing Display Pages and Layouts

Adding, deleting, and arranging display pages.

Customizing Page Titles and Display Sizes

Changing page names and selecting grid layouts.

Adding and Configuring Specific Sensors

Adding and Removing Sensors from Pages

How to add/remove sensor data displays.

Servo Monitor Setup and Display

Specific configuration for monitoring servo data.

TMA-1 Receiver Voltage Monitoring

Configuring Receiver Voltage Display Settings

Setting up how receiver voltage is shown.

Setting Receiver Voltage Parameters

Title, sensor type, slot, max value.

TMA-1 Receiver Voltage Alerts

Enabling and Setting Voltage Alarms

Configuring high/low voltage alerts.

Defining Voltage Alert Thresholds

Setting minimum and maximum values for alerts.

TMA-1 Temperature Sensor Configuration

Setting Up Temperature Display

Configuring the temperature display.

Selecting Temperature Units and Limits

Choosing °C/°F and setting max value.

TMA-1 Temperature Sensor Alerts

Enabling and Configuring Temperature Alerts

Setting up high/low temperature alerts.

Defining Temperature Alert Thresholds

Setting min/max temperature for alerts.

TMA-1 RPM Sensor Configuration

Setting Up RPM Display

Configuring the RPM display.

Selecting RPM Types and Limits

Choosing sensor type (Optics/Magnet) and setting max RPM.

TMA-1 RPM Sensor Alerts

Enabling and Configuring RPM Alerts

Setting up high/low RPM alerts.

Defining RPM Alert Thresholds

Setting min/max RPM for alerts.

TMA-1 Altitude Sensor Configuration

Setting Up Altitude Display

Configuring the altitude display.

Selecting Altitude Units and Resetting

Units (m/ft), variometer units, and sensor reset.

TMA-1 Altitude Sensor Alerts

Enabling and Configuring Altitude Alerts

Setting up high/low altitude alerts.

Defining Altitude Alert Thresholds

Setting min/max altitude for alerts.

TMA-1 GPS Sensor Configuration

Setting Up GPS Display

Configuring the GPS display.

Selecting GPS Units and Resetting

Units (m/s, km/h) and sensor reset.

TMA-1 GPS Locus Functionality

Configuring GPS Locus Display Settings

Setting up the GPS Locus display.

Magnifying and Viewing GPS Locus Data

How to zoom in on the map display.

TMA-1 Data Logging Operations

Starting and Stopping Data Logging

Procedures for initiating and ending data recording.

Managing Logged Data

Viewing Logged Sensor Data

How to access and review recorded data.

Saving Log Files to Device Storage

Information on where log data is stored.

TMA-1 System Settings and Operation

Selecting Transmission System Type

Choosing between FASSTest and T-FHSS.

Understanding and Resolving System Errors

Guidance on error messages and link issues.

TMA-1 Application Customization

Changing Application Language

Options for language selection.

Viewing Software Version Information

Accessing the 'About' section.

TMA-1 Display and Alert Preferences

Configuring Screen Appearance and Alert Sounds

Adjusting visual themes and audio alerts.

Restoring Default Application Settings

Resetting the app to its original configuration.