Future light PHS-200 - Technical Specifications; Fitting Lamps; Recommended Controllers

51838165X87NXS_V_1_1.DOC
39/75
TECHNICAL SPECIFICATIONS
Power supply: 230 V/50 Hz
Power consumption: 400 W
DMX-control-channels: 8
DMX-512-connection: 3-pin XLR
Flash-rate: 10 Hz
Colour-wheel: 9 dichroic filters and open
Rotating gobo-wheel: 7 gobos and open
Outside diameter of the gobos: 25 mm
Image diameter of the gobos: 20 mm
Maximum PAN-movement 630°: in 2.0 s
Maximum TILT-movement 265°: in 1.5 s
Length of base: 380 mm
Width of yoke: 330 mm
Height (head horizontal): 450 mm
Weight (net): 15 kg
Maximum ambient temperature t
a
:
45° C
Maximum housing temperature t
B
(steady state):
85° C
Min.distance from flammable surfaces: 0.5 m
Min.distance to lighted object: 0.5 m
Fuse: T 4 A, 250 V
Fitting lamps:
OMNILUX OSD 90V/250W GX-9.5 2000h 6700K No. 89106005
OSRAM HSD250 90V/250W GY-9.5 2000h No. 89106010
PHILIPS MSD250 90V/250W GY-9.5 2000h No. 89106015
OMNILUX OSD 250/2 94V/250W 2000h 8000K No. 89106105
OSRAM HSD250/2 90V/250W GY9.5 3000h 7800K No. 89106110
PHILIPS MSD250/2 90V/250W GY-9.5 2000h No. 89106115
SYLVANIA BA250/2 SE D 90V/250W GY-9.5 No. 89106120
Recommended controllers:
FUTURELIGHT CP-256 controller No. 51834285
FUTURELIGHT CP-256/32 controller No. 51834286
Wizard-512 DMX-Software + Interface No. 51860101
Wizard-1024 DMX-Software + Interface No. 51860110
Please note: Every information is subject to change without prior notice. 17.02.2003 ©