FUXTEC CTL-900 - Assembly of the Roofing; Fixing the Rear Wheels; Mounting the Rear Wheel Axle

Original-Bedienungsanleitung FUXTEC CTL-900_de_en_fr_ ita_rev3
_________________________________________________________________________________
22
2.2 Mounting the rear wheel axle
2.3 Fixing the rear wheels
2.4 Assembly of the roofing
Step 1:
Position the rear axle as shown
Step 2:
Press the rear wheel axle onto the frame until it
engages.
Step 3:
Please check carefully that the rear wheel axle is
engaged and then firmly connected to the frame.
Step 1:
Pull the safety bolt as shown.
Step 2:
While holding the pulled out safety bolt, put the wheel
on the rear axle. When the wheel is in the desired
position, release the safety bolt.
Step 3:
Repeat the procedure for the 2nd rear wheel.
Step 1:
Remove the two pairs of roof bars from the transport
bag.