FUXTEC CTL-900 - Attaching the Rear Bag; Intended Use; Removing and Attaching the Protective Cover

Original-Bedienungsanleitung FUXTEC CTL-900_de_en_fr_ ita_rev3
_________________________________________________________________________________
24
2.5 Attaching the rear bag
3. Intended use
3.1. Removing and attaching the protective cover
Hook the rear bag into the horizontal frame struts
below the push handle as shown.
Step 1:
Place the wagon in front of you as shown.
Step 2:
Loosen the two safety clips on the lower part of
the wagon
Step 3:
Open the velcro and pull the protective cover
upwards.
To attach the protective cover, proceed in the
reverse order.