FUXTEC CTL-900 - Folding the Wagon

Original-Bedienungsanleitung FUXTEC CTL-900_de_en_fr_ ita_rev3
_________________________________________________________________________________
26
3.3 Folding the wagon
Step 1:
Remove the roofing and retract the
telescopic rods into the frame.
Step 2:
Fix the safety clip inside the frame
as shown.
Step 3:
Pull on the fabric tab shown to pull
the wagon together. Then press the
wagon together by hand.
Step 4:
Close the safety clip. To reduce the
size of the wagon, you can also
easily pull the safety strap.