Original-Bedienungsanleitung FUXTEC CTL-900_de_en_fr_ ita_rev3
_________________________________________________________________________________
30
3.10 Maintenance and care
The product should be checked and cleaned regularly.
– Please regularly check all essential parts for damage. Make sure that the mechanical
components are working correctly.
– Please regularly check that all screws, rivets, bolts and other fastenings are tight.
– Do not use grease or oil for lubrication, but a silicone-based spray.
– Too heavy a load, improper folding or the use of unauthorised accessories can damage or
destroy the wagon.
– Never load more than 5 kg into the rear bag.
– Store the folded wagon only in a well-ventilated place to prevent mould growth.
– The textile parts may lose colour if exposed to heavy use over an extended period (e.g.
intensive sunlight); however, this does not constitute a reason for complaint.
– Do not use the wagon if parts are bent, worn or broken.
– Do not use accessories that have not been approved by FUXTEC GmbH for use with the CTL
900.
Step 3:
Open all velcro fasteners on the
underside of the wagon. Afterwards,
you can remove the loose fabric
cover from the frame.
To Next Page
Loading...
