How to start a FUXTEC FK-KS126 Chainsaw that won't start?
If your FUXTEC Chainsaw engine won't start, it might be due to several reasons. First, make sure you're using fresh, high-quality fuel, as water or inferior fuel can cause issues. If the engine seems flooded, remove the spark plug, dry it, and then pull the starter without the choke. If that doesn't work, try replacing the spark plug with a new one.
Why does my FUXTEC Chainsaw have low power?
If your FUXTEC Chainsaw has low power, poor acceleration, or out-of-round idling, it could be due to the fuel quality. Try using new fuel. Also, check if the air filter or fuel filter is clogged and clean them if necessary. Finally, ensure that the idle speed is correctly set.
What to do if FUXTEC FK-KS126 Chainsaw has no oil supply?
If there is no oil supply in your FUXTEC Chainsaw, the oil might be of poor quality, so try replacing it. Also, inspect the oil pipelines and openings for any blockages and clean them.
General| Engine Type | 2-stroke |
|---|---|
| Bar Length | 40 cm |
| Chain Pitch | 3/8" |
| Weight | 5.2 kg |
| Power | 2.2 kW |
| Power Source | Gasoline |
To Next Page
