Original Operating Manual Tree Care Saw FX-KS126_rev03
9
• Always keep an eye on the surroundings to make sure that your work
does not endanger people or animals
• No other persons or animals may be present within 15 m of the cutting
area, as they may be injured by objects thrown away.
• Never work in poor light or weather conditions
• Just sawing wood. Do not use the appliance for work for which it is not
intended
• Keep the handles dry, clean and free of oil and grease. Greasy, oily
grips are slippery and lead to loss of control
• Avoid sawing in bushes, as small branches can get caught in the saw-
chain and be thrown around uncontrollably
• Make sure that you can stand firmly and safely in any working position
• Always hold the device firmly with both hands and use the carrying
strap. Grip the rear handle with your right hand and the bow handle
with your left, even if you are left-handed. Do not let go of the handles!
• Keep all parts of the body away from the saw-chain when the saw is
running
Before starting the saw, make sure that the saw-chain does not touch
anything
• Always ensure a stable working position when using the device.
Slippery surfaces or unstable standing surfaces such as on a ladder can
lead to loss of balance or loss of control over the device
• Do not extend your arms too far forward
• Never work on ladders or in other positions where you do not have a
secure footing
• Be careful walking backwards. Risk of tripping!
• Always saw at high chain speed
• Do not saw any wooden parts under tension
• Do not work alone! Make sure that you have call, sight or other
connection to another person who is able to provide first aid in an
emergency
• Switch off the engine whenever you move the vehicle. The device may
only be carried with the protective cover attached
• Never operate the device in a damp or wet environment.
• Do not remove or cover symbols that are on your device. Notices on
the device that are no longer legible must be replaced immediately
To Next Page
Loading...