Original Bedienungsanleitung FUXTEC FX-MS125_de_en_fr_ita_es_rev01
53
FUEL AND 2-STROKE OIL
Use unleaded petrol with 2-stroke engine oil in a 40:1 ratio.
WARNING: Never use just fuel in your engine. This will cause permanent engine
damage and void the manufacturer's warranty for this product. Never use a fuel mixture
that has been stored for more than 90 days.
WARNING: This must be a premium grade, 2-stroke air-cooled engine oil.
FUEL MIXTURE
Mix fuel with 2-stroke oil in a container provided for this purpose. Note the following
mixture table on the following page for the correct fuel/oil ratio. Shake the tank to
ensure complete mixing.
WARNING: Failure to lubricate the engine eliminates the liability of the device
manufacturer.
Petrol and oil must be mixed in a ratio of 40:1.
Recommended fuel
It is recommended to use unleaded petrol with an octane number of 90 # or higher to
reduce carbon deposition in the combustion chamber. Do not use old or dirty petrol.
Keep the fuel tank dust-free and avoid water getting into the tank. Sometimes misfiring
can occur in case of overload, which is normal.
If the backfiring can be heard under average load, we recommend replacing the petrol.
If the misfire is still present afterwards, don't hesitate to contact our customer service.
WARNING
⚫ Petrol is highly flammable and can cause an explosion in case of sparks
⚫ Refuel only in well-ventilated rooms and allow the engine to cool down before
filling. Do not smoke during refuelling. Open fires and sparks must be avoided.
To Next Page
Loading...
Need help?
General
