Original Bedienungsanleitung FUXTEC FX-MS125_de_en_fr_ita_es_rev01
52
Installation of the lawn trimmer (thread spool)
- Place the fastening disc (3) on the shaft.
- Use the Allen key (1) to lock the scythe head. If necessary, turn the fastening
disc (3) slightly.
- Screw the thread spool (2) onto the shaft by turning it anticlockwise.
- Now tighten the thread spool by hand.
- Remove the Allen key and check the smooth running of the thread spool.
Warning!
Ensure that all components are correctly assembled and installed and that all screws are
tightened.
To Next Page
Loading...
