FUXTEC FX-MT152 User Manual

Original User Manual FUXTEC FX-MT152/-MT152E/-MT252_rev16
24
The working posture and method are exactly the same as for the motor scythe. The
cutting bar is moved back and forth, just above the ground.
Adjusting the cutting angle of the hedge trimmer attachment
Adjust the cutting angle: Release the lock (1), simultaneously pull the two release levers
(2) and turn the blade position to the desired angle via the adjusting lever (3).
Make sure that the lock (1) is always engaged.
Maintenance of the attachment:
Top up 20 grams of grease/lubricant every 25 operating hours.
Use a grease gun to press the
lubricant into the nipples (1).

FUXTEC FX-MT152 Specifications

General

Brand	FUXTEC
Model	FX-MT152
Category	Cutter
Language	English