FUXTEC FX-MT152 User Manual

Original User Manual FUXTEC FX-MT152/-MT152E/-MT252_rev16
41
WARNING: Failure to lubricate the device eliminates the liability of the device
manufacturer.
Gasoline and oil must not be mixed in a ratio of more than 40:1.
Recommended fuel
It is recommended to use unleaded gasoline with an octane number of 90 # or higher to
reduce carbon deposition in the combustion chamber. Do not use old or dirty gasoline.
Keep the fuel tank dust-free and avoid water getting into the tank. Sometimes misfiring
will occur under usual overload.
If the backfiring is heard under average load, we recommend replacing the gasoline. If
the misfire is still present afterward, please contact an authorized workshop.
WARNING
 Gasoline is highly flammable and can cause an explosion in the case of sparks.
 Refuel only in well-ventilated rooms and allow the engine to cool down before
filling. Smoking and open fire, as well as any sparks, must be avoided during
refueling.
 Do not overfill the tank (see figure max. filling level).
 After refueling, check that the fuel filler cap is closed correctly.
 Avoid any spillage of gasoline.
 Keep the device away from children.
Gasoline
Two-
stroke engine oil
(40:1) Gasoline
Two-
stroke engine oil
(40:1)
1 liter 0.025 liters 5 liters 0.125 liters
2 liters 0.050 liters 10 liters 0.250 liters
Gas cap
max. filling level

FUXTEC FX-MT152 Specifications

General

Brand	FUXTEC
Model	FX-MT152
Category	Cutter
Language	English