Speed dial:
1. M1/M2/button: Press Menu, scroll to Settings, select Speed dial and press OK,
select Status to set the status On/Off, then select Set numbers and set the /
button number from the phonebook, then press OK to save.
Remark: When in standby mode, long press button / Popup” No speed
number. Assign now, OK, Choose from phonebook M1, M2 contact.
When pressing on of these buttons, then will start dialing.
2. 2-9 Number: press OK, select Status to set the status On/Off, then select Set
numbers and set the 2-9 numbers from the phonebook, then press OK to save.
Dial Num voice:
Here you can enable or disable button pad voice by pressing Activate or Off.
Amplify receiver volume:
This mobile telephone has a loud ringer. Moreover, there is a amplified function to
increase extra 25dB volume with an amplified button. This useful feature makes it a
highly suitable telephone for the elderly with hard of hearing without using extra
hearing aid device or people in very noisy surrounding.
Press Menu enter into Settings, scroll to Amplify receiver volume, and press OK to
select On or Off. When select On, whenever you make or receive a call, the amplify
To Next Page
Loading...
