G-Lab MD2200 - APPENDIX II; Guidance and manufactures declaration - electromagnetic immunity

- 19 -
± 8 kV contact
± 15 kV air
50 Hz: 30 A/m
60 Hz: 30 A/m
± 8 kV contact
± 15 kV air
Floors should be wood, concrete or
ceramic tile. If floors are covered
with synthetic material, the relative
humidity should be at least 30 %.
Power frequency magnetic fields
should be at levels characteristic of
a typical location in a typical
commercial or hospital
environment.
50 Hz: 30 A/m
60 Hz: 30 A/m
Electrostatic discharge
IEC 61000-4-2
Rated power frequency
magnetic fields
IEC 61000-4-8
The Sphygmomanometer
(MD2200)
is intended for use in the electromagnetic environment specified below.
The customer of the user of Sphygmomanometer
(MD2200)
should assure that it is used in such an
environment.