Administrative Tool
p. 129
Reset to Factory Settings
To perform Reset to Factory Settings, first backup your data to a different device, then click the
system menu and choose Reset to Factory Settings
NOTE: WHILE PERFORMING RESET TO FACTORY SETTINGS ALL THE DATA WILL BE WIPED OUT
AND BECOME UNRECOVERABLE. THE G-RACK 12 WILL BE RESTORED TO ITS OUT-OF-BOX
STATE.
Use this option only if you need a fresh system to start a new project.
To be able to use the data with new settings, backup the data to a different location, perform Reset
to Factory Settings and move the data back.
Also you can manually go through the menus and adjust them to meet the current requirements.
Shutdown
To perform factory reset, click the system menu and choose Shutdown
This option will shutdown the G-RACK 12 server unit only. To perform a full shutdown it is required
to press the power button on the front panel of the expansion chassis(es).
Reboot
To perform reboot, click the system menu and choose Reboot.
To Next Page
Loading...