PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE
10
Ⅱ.Configuration Parameter
Configuration Parameter (Correct configuration of parameters to ensure more
accurate engraving)
For each machine in the factory, the parameters are debugged and the engraving
test is carried out.
If you are using Windows, use the debugging parameters directly
（Screenshots from the flash drive）
For MacOS, click this link(https://api.gweikecloud.com/static/service/MacOS.conf.pdf)
and follow the steps to configure the parameters.
For mobile devices (Android or iOS), click this link(https://api.gweikecloud.com/stat-
ic/service/Mobile.conf.pdf) and follow the steps to configure the parameters.
4
Open Security & Privacy in System Preferences and after unlocking, allow apps
to be downloaded from anywhere
To Next Page
Loading...