G-WEIKE G2 - Engraving Techniques; Bevel and Handheld Engraving Methods

PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE
06
Engraving
Bevel Engraving
Handheld Engraving
The fixing nut and angle adjusting nut can be loosened to adjust the
main engine to a suitable angle.
Hold the handle of the main engine directly, and aim at the surface
of the object to be engraved for engraving.
1
2
Focus to the surface of the
object 211mm/261mm
Focal length 211mm/261mm
Handle position
Handle position
Protection cover height=Focal length 211mm/261mm