Gadmei UTV240 - Troubleshooting; Troubleshooting: Invalid Indicator or No Picture; Troubleshooting: Invalid Remote Control Retransmission; Troubleshooting: Image Interruption Issues

GADMEI-UTV240 User’s Manual-V1.0
28
8. Troubleshooting
Troubleshooting1: Indicator invalid, no picture.
Solutions:
Check whether transmitter and receiver are powered
on.
Change the transmission channel of the receiver (refer
to operation manual/channel switch).
Adjust the place of transmitter and receiver (refer to
connection illustration).
Troubleshooting2: Remote control retransmission invalid.
Solutions:
Check whether the transmitter is right connected (refer
to connection illustration of transmitter).
Adjust the antenna place of transmitter and receiver
(refer to antenna placing).
Troubleshooting3: Image interrupted
Change the transmission channel of receiver (refer to
channel selection).
Adjust the place of transmitter and receiver (refer to
connection and installation).
Solutions:
Troubleshooting