41
Basic settings
en
Q
Basic settings
Basic setti ngs
The appliance has various basic settings. These basic
settings can be altered to suit your individual
requirements.
--------
Display Function
™‚
Signal tones
‹¯ All signals are switched on.*
ŒMost of the signals are switched off.
™ƒ
Time for selecting the hotplate
† The hotplate remains selected for 5 seconds.
‚‹ The hotplate remains selected for 10 seconds.*
‚† The hotplate remains selected for 15 seconds.
ΠUnlimited: The hotplate which was set last remains selected.
™„
Power management function. Limiting the total power of the hob
‹ Deactivated. Maximum power of the hob.
*/**
‚ 1000 W minimum power.
‚.† 1500 W
...
„ 3000 W recommended for 13 A.
„.† 3500 W recommended for 16 A.
… 4000 W
….† 4500 W recommended for 20 A.
...
Š or Š.†Maximum power of the hob.**
™…
Restoring the factory settings
‹”” Keep personal settings.*
‹¯ Restore factory settings.
™†
Cooking sensor
Connect the wireless cooking sensor to the hob.
Set according to height above sea level:
‚ - ƒ Decrease
„ Basic setting
… - Š Increase
™‡
Professional chef function
Select a single cooking zone in order to preset the power level for the professional chef function.
™ˆ
Cookware, checking the result of the cooking process
‹ Not suitable
‚ Not perfect
ƒ Suitable
™Š
Home Connect
~ "Home Connect settings" on page 44
* Factory setting
**The hob's maximum power output is shown on the rating plate.
To Next Page
Loading...
