Rev. 00 OCTOBER 2009 Page / 08
GAGGIA
07 DISASSEMBLY
6) Unscrew the screws shown
to remove the insert on the
base of the casing
7) Unscrew the screws shown
and disconnect the valve from
the water connections.
7) Unscrew the screws shown
and disconnect the valve from
the mesh hoses
7.8. Pump and turbine disassembly
6
7
PUMP
Remove the connection 1, disconnect the silicone
hoses 2
Unscrew the safety valve and remove the pump from
the two supports
TURBINE
Remove the connection and disconnect the silicone hoses
2
2
1
05
To Next Page
