41
ENGLISH
7.2 TEA MEASURE
PROGRAMMING
(HOT WATER)
It is possible to modify the timed tea
measures according to the following
sequence:
Press key T5 of coffee unit 1 and keep
pressed down for over 5 seconds and check
that all the keyboard led indicators come
on.
Press the T8 tea key within 30 seconds
(programming time-out).
This begins the tea water delivery operation.
Once the required measure is obtained
press T8 again to suspend water delivery.
In this way the new tea water delivery time
is memory and all the keyboard leds go out.
Press key T5 again to immediately escape
from the programming phase.
To Next Page
Loading...
