Need help?Do you have a question about the Gaggia GE-GD ONE and is the answer not in the manual?
General| Type | Espresso Machine |
|---|---|
| Groups | 1 |
| Voltage | 120 V |
| Pump Type | Vibratory |
| Steam Wand | Yes |
| Hot Water Dispenser | Yes |
| Body Material | Stainless Steel |
| Material | Stainless Steel |
| Pump Pressure | 15 bar |
| Boiler Capacity | 1.5 liters |
| Water Source | Tank |
| Product Type | Commercial |
Fill the tank with cold water, preferably with low hardness to avoid encrustations.
Connect the power cable and plug into an appropriate outlet, ensuring the main switch is off.
Connect the exhaust cup to the exhaust duct or exhaust tank.
Select the appropriate filter based on the coffee quantity to avoid leftover powder attachment.
Replace the group thermostat with a lower temperature one for optional temperature reduction.
Details on the four supplied spouts and their distances from the cup-holding tray.
Dispensing coffee using programmed measures (T1-T4) or continuous mode (T5).
How to use the continuous coffee dispensing function and its important notes.
Indicates low water level with flashing keyboard LEDs and ringing.
Instructions on how to dispense hot water using the dedicated nozzle.
Steps for preparing milk foam using the steam rod for cappuccino.
Procedure for replacing the seal between the unit and the filter-holder for preventing leaks.
To Next Page
