OPERATION INSTRUCTIONS
OPERATION INSTRUCTIONS
9
3
NOTE: While in the process of setting the clock, you can cancel
the settings by pressing the STOP/CANCEL.
The CLOCK
cannot be set while the TIMER is running.
Press the dial or CLOCK/TIMER to
confirm the hour.
4
Turn the dial until the correct minute is
displayed.
5
Press the dial or CLOCK/TIMER to
confirm the minute and finish setting.
1
Example: How to set a 12-hour clock at 11:58.
In standby mode, press and hold
CLOCK/TIMER for 3 seconds to
select 12-hour clock (press the pad
again to select 24-hour clock).
2
Turn the dial until the correct hour is
displayed.
Setting the Clock
You can set the clock in 12-hour or 24-hour by pressing
CLOCK/TIMER in standby mode.
or
or
To Next Page
Loading...
