Galanz ExpressWave GEWWD22S3SV125 - Sound ON;OFF Function; Energy Saving Mode

20
OPERATION INSTRUCTIONS
The Sound ON/OFF function can be used to mute the microwave.
In standby mode (except on child lock setting), press the
ON/OFF/HOLD
3 SEC. and the screen will display
‘OFF’ for 3 seconds after which the microwave will be muted.
This includes the end of cooking alert and all pad noises. To turn
sound back on, press the ON/OFF/HOLD
3 SEC..
You will hear a beep when this is complete.
In standby mode, press and hold on
STOP/CANCEL/ENERGY SAVING pad to enter the ECO mode.
Screen will stop showing a display. Above operation is the only
way to start the ECO mode.
The Energy Saving mode can work under child lock function too.
Example: How to set Sound ON/OFF .
Example: How to set Energy Saving mode.
NOTE:
For default mode, the buzzer sounds is open.

OPERATION INSTRUCTIONS
Sound ON/OFF Function Energy Saving Mode
1
In standby mode, press the
ON/OFF/HOLD
3 SEC.. Display will
show ‘OFF’, after which sound is
disabled.
2
To turn sound back on, press the
ON/OFF/HOLD
3 SEC. pad again. A
beep will sound and display will show
‘ON,’ after which sound is re-enabled.
ON/OFF
HOLD 3 SEC.
ON/OFF
HOLD 3 SEC.
STOP
ENERGY SAVING
CANCEL
Press and hold
for 3 seconds.
Press and hold
for 3 seconds.
3
1
In standby mode, press and hold the
STOP/CANCEL/ENERGY SAVING pad
and enter the ECO mode. Screen will stop
showing a display.
2
Press any pad to activate the screen.
ECO mode will still be activated; the
screen will turn off after 10 seconds
without operation.
Press and hold the
STOP/CANCEL/ENERGY SAVING
pad for another 3 seconds to exit the
ECO mode .
STOP
ENERGY SAVING
CANCEL