GALAXIS SHOWTECHNIK PYROTEC G-Flame - Page 5

5
Page
28.2. Display of special information and behavior of the device in the
receiving mode or respectively ready to fire mode if 'Wireless
(PFC or PFS)' or 'Cable (RS485 of PFC)' has been selected as
control method 48
28.2.1. Status information regarding firing mode and hazard zone
48
28.2.2. Display of the device ID number
48
28.2.3. Display of messages
49
28.2.4. Programming of the system ID
49
28.2.5. The monitoring function Radio Interference
49
29. Usage in rainy conditions
50
30. Radio range
50
31.
Radio Range Test
51
32. Remote access
51
33. Charging
51
34. C
ontrol of the device via serial data cables via the RS485
interface in conjunction with the PFC Advanced 52
35. Operation time
53
36. Installation und de
-
installation of the Advanced wireless module
53
36.1. Installation of the radio module
53
36.1.1. Installation of the hardware
53
36.1.2. Software installation of the Advanced wireless module
54
36.2. De
-
installation of the wireless module
55
36.2.1. De
-
installation of the wireless module in the software
55
36.2.2. De
-
installation of the
hardware
55
37. Mounting on light or speaker stands
55
38. Mounting on truss elements
56
39. Optional accessory: Power Upgrade
56
40
. Cleaning
5
6
4
1
. Microfilter
5
7
42
. Maintenance
57
4
3
. Warranty
57
4
4
. Damages caused by misusage, maloperation, ma
lfunction
57
4
5
. Technical data
58
4
6
. CE marking of the EU version
47. Address of the manufacturer and contact details for requesting an
EU declaration of conformity
6
0
60