The Gallagher SMB Kit (C500300) is a comprehensive, cloud-based security solution designed for small to medium businesses. It integrates intruder alarm, access control, and user management functionalities, all accessible through a single mobile application. The kit comes pre-wired to support a default software configuration, simplifying installation.

Function Description:

The core of the system is the SMB Controller (C500100), which connects to the site's wired network and the Gallagher cloud for configuration and operation. It supports various input/output (I/O) boards and readers to manage access points and monitor security zones. The system is designed for local arming/disarming via a smartphone using Bluetooth communication with a reader, even if internet connectivity is lost. For sites with unreliable networks, the Permaconn PM54 can be integrated to provide 4G or Wi-Fi connectivity to the cloud.

Kit Contents:

The standard cabinet includes:

1 x SMB Controller (C500100)
1 x HBUS 8In Board (C300680)
1 x HBUS 8In 4Out Board (C300684)
1 x SMB Fire Relay & Fuse Board (C500993)
1 x Power Supply 3.5 A (C200340)
1 x I/O Board Mounting Plate (C200001)
1 x Metal Mounting Plate with ducting
1 x Door earth wire
1 x Wiring loom and associated internal cable assembly
2 x Cabinet keys
32 x 4k7 ohm resistors
4 x Screws (for fixing the cabinet to the mounting surface)
1 x White sticker (for rear optical tamper)

Note: 7 Ah 12 V standby batteries and an IEC power lead are not provided.

Additional items that can be integrated include:

SMB Readers (C500430, C500431, C500480, C500481, C500490, C500491)
SMB Permaconn PM54 Kit (NZ C500609, AU C500610)
SMB Dual Cabinet with 8 A power supply (C200105)
HBUS 8In Board (C300680)
HBUS 8In 4Out Board (C300684)
1 x HBUS 16In 16Out Board (C300688)
1 x HBUS 8 Port Hub (C300698)

Important Technical Specifications:

Power Supply:

Input voltage: 90 - 250 V AC
Output voltage: Primary 13.8 V
Output current: 3.5 A
Power rating: 51.38 W
Battery low and mains failure outputs: Normal state 2.5 V, Alarm state 3 V
Temperature range: -10 °C to 50 °C (14 °F to 122 °F)

Controller:

Voltage: 9 Vdc - 16 Vdc
Current without devices connected: 110 mA
Maximum current per RS485 port: 750 mA
Temperature range: -10 °C to 70 °C (14 °F to 158 °F)
Humidity: 0 - 95% non-condensing
Ethernet port: 1 x 10 Mbs/100 Mbs

I/O Boards (8In Board & 8In 4Out Board):

8In Board operating current: 50 mA DC (all inputs terminated with 4k7 resistors)
8In Board power rating: 0.68 W
8In 4Out Board operating current: 45 mA DC (relays OFF), 200 mA DC (relays ON)
8In 4Out Board power rating: 0.61 W (relays OFF), 2.72 W (relays ON)
Fuse: Onboard 1 A resettable polyfuse

Readers (T11, T15, T30):

Voltage: 9 Vdc - 16 Vdc
Current (Idle/Maximum at 9 Vdc):
- T11: 106 mA / 176 mA
- T15: 110 mA / 168 mA
- T30: 130 mA / 241 mA
Current (Idle/Maximum at 13.6 Vdc):
- T11: 80 mA / 142 mA
- T15: 81 mA / 136 mA
- T30: 87 mA / 160 mA
Temperature range: -35 °C to +70 °C (direct sunlight may increase internal reader temperature)
Humidity: 0 - 95% non-condensing
Environmental protection: IP68
Impact rating: IK07
Maximum number of access controlled doors on one SMB controller: 10
Standards and compliance: FCC, RCM, CE, RoHS

Usage Features:

Cloud-based Management: The system is fully integrated with the Gallagher cloud, allowing for remote configuration and user management via the SMB Configuration App (a web-based portal).
Intruder Alarm & Access Control: Provides comprehensive security functionalities including intruder detection and controlled access to premises.
Mobile App Integration: Users can arm/disarm the system and manage access through a dedicated mobile app.
Pre-wired for Default Configuration: The kit comes pre-wired, simplifying initial setup and supporting a default software configuration.
Expandable I/O: Two I/O boards (8In Board and 8In 4Out Board) are included, offering 16 inputs and 4 outputs. The HBUS 16In 16Out Board can be added for further expansion.
Balanced Inputs for Tamper Detection: Inputs require resistors for tamper detection, wired in series with normally-closed tamper switches for enhanced security.
Output Relays: Provided as 'dry' contacts, rated 3 A at 24 Vdc for resistive loads or 1 A at 24 Vdc for inductive loads, controllable via the SMB Configuration App.
Reader Connectivity: Supports HBUS communication protocol, allowing readers to be daisy-chained up to 500m (1640 ft) from the controller. The HBUS 8 Port Hub (C300698) enables star wiring for multiple doors.
Battery Backup: Supports up to two 7 Ah 12 V batteries (not supplied) for standby power during mains failure. The power supply provides a 3.5 A charging current.
Mains Failure and Battery Low Alarms: The power supply provides alarm outputs for monitoring battery low voltage (below 10.8 V) and mains failure (voltage outside 90-250 V range).
Test Mode: Allows technicians to install, configure, and test the system without triggering alarms or notifying monitoring services.
Controller Web Browser Configuration: Provides an alternative method to configure specific controller settings (date/time, NTP server) via a web browser, useful for proxy server settings or when the DHCP IP address is unknown.

Maintenance Features:

Firmware Updates: The controller automatically downloads the latest firmware and default configuration from the cloud upon assignment to a site.
Tamper Detection: Features both front optical tamper detection (for cabinet door opening) and rear optical tamper detection (for cabinet removal from mounting surface). These tampers are initialized after wiring is complete and the cabinet is closed and locked.
Battery Life Calculation: Instructions are provided to calculate battery life based on combined battery capacity and total current draw of devices.
Troubleshooting: LED flash patterns on the controller provide visual indicators for various operational states, including network connectivity, configuration status, and authentication issues, aiding in troubleshooting.
Technical Support: Gallagher Technical Support is available for login details, configuration assistance, and issues with cloud authentication or firmware.

Gallagher C500300 - Page 11

Table of Contents