3E2361 Weigh Scale W210 User Manual
15
ZERO TRACKING
During a weighing session, mud, dung and other matter can accumulate on
the weighing platform. After each animal leaves the platform, the zero
tracking feature attempts to compensate for the weight of this accumulation
and, if it succeeds, sets the Weigh Scale to zero. If the accumulation weighs
more than the Weigh Scale's zero tracking range, zero tracking will not work
and the icon will flash.
To restore zero, press the blue Zero button.
If the Weigh Scale consistently fails to restore to zero, check that there are no
obstructions under or around the platform or crate.
Note:
The zero tracking feature is enabled when the Weigh Scale is set to the
Automatic and Manual modes. It is disabled when set to the Fine mode.
To Next Page
Loading...
Need help?
General
