Why are icons flashing and alarm sounding on my Galleon 2K UPS?
This indicates an overload. Try removing some of the connected devices from the UPS output. If the UPS is locked in Bypass mode after repetitive overloads, remove excess loads, then shut down the UPS and restart it.
What to do if Galleon UPS shows no indication and alarm even though the main is normal?
First, check that the input power cord is firmly connected to the mains. Also, verify that the AC input power cord is correctly plugged into the AC input, and not the UPS output.
What does it mean when fault code 43 is shown on Galleon UPS?
Fault code 43 indicates that the Galleon UPS shut down automatically due to an overload at the output. Remove some of the connected devices from the UPS output and then restart the UPS.
Why is the battery backup time shorter than expected on my Galleon UPS?
This could be because the batteries are not fully charged. Charge the batteries for at least 5 hours and then check their capacity. If the problem persists, contact your dealer.
What does it mean when the icon and warning code are flashing on my Galleon 2K?
This could be due to several reasons: * The EPO function may be activated. Try setting the circuit in a closed position to disable the EPO function. * The line and neutral conductors of the UPS input may be reversed. Rotate the mains power socket by 180° and then connect it to the UPS system. * The external or internal battery might be incorrectly connected. Check that all batteries are connected well.
What does fault code 14 mean on a Galleon 2K UPS?
Fault code 14 indicates that the Galleon UPS shut down automatically because a short circuit occurred on the UPS output. Check the output wiring and the connected devices for a short circuit.
What does fault code 28 mean on a Galleon 2K UPS?
Fault code 28 means the battery voltage is too low or the charger is faulty. Contact your dealer.
What does fault code 27 mean on a Galleon UPS?
Fault code 27 means the battery voltage is too high or the charger is faulty. Contact your dealer.
What does fault code 45 mean on a Galleon UPS?
Fault code 45 indicates that the charger does not have output and the battery voltage is less than 10V/PC. Contact your dealer.
What does it mean when my Galleon UPS shows fault code 01, 02, 03, 11, 12, 13 or 41?
A UPS internal fault has occurred. Contact your dealer.
Guidelines for safely transporting the UPS system in its original packaging to prevent damage.
Steps to prepare the UPS for installation, including acclimation to the environment and avoiding unsuitable locations.
Crucial installation guidelines, such as avoiding overloads and using proper earthed outlets.
Important safety notes for operating the UPS, including mains disconnection and internal power sources.
Safety measures for maintenance and service, emphasizing hazardous voltages and battery handling.
Step-by-step guide for physically installing the UPS unit, including battery wire connection.
Instructions for connecting the UPS input power and configuring output connections for different loads.
Instructions on how to power on the UPS unit using the ON/Mute button.
Guide to download and install software for optimal system protection and UPS configuration.
Detailed steps for safely replacing the UPS internal batteries, noting its hot-swappable design.
Explanation of the functions for the ON/Mute, OFF/Enter, Select, and combined buttons.
Details the different sounds and frequencies of the UPS audible alarms.
Guide to setting up UPS parameters, including program alternatives and their options.
To Next Page
General