Need help?Do you have a question about the Gallien-Krueger MB 800 and is the answer not in the manual?
Output Power| output_power_8_ohms | 560W |
|---|---|
| output_power_4_ohms | 800W |
Input/Output Specifications| maximum_input_level | 0.6V Rms |
|---|---|
| maximum_input_level_with_-10dB_pad | 1.6V Rms |
| input_impedance | 1M Ohms |
| send_output_impedance | 220 Ohms |
| return_input_impedance | 50K Ohms |
| tuner_output_impedance | 10K Ohms |
| direct_output_impedance | 500 Ohms |
Equalizer| bass | +/-10dB @ 60Hz |
|---|---|
| lo_mid | +6dB/-10dB @ 250Hz |
| hi_mid | +6dB/-10dB @ 1KHz |
| treble | +/-14dB @ 7KHz |
Voicing Filters| contour_50Hz | +2dB |
|---|---|
| contour_500Hz | -10dB |
| contour_7KHz | +3dB |
Power Requirements| power_requirements_usa_canada | 120V/60Hz |
|---|---|
| power_consumption_full_power | 880W |
| power_consumption_average_power | 110W |
| power_requirements_europe | 230V/50Hz/60Hz |
| power_requirements_japan | 100V/50Hz |
Dimensions and Weight| dimensions_hxwxd | 1.75”[44.45mm] X 11”[279.4mm] X 9”[228.67mm] |
|---|---|
| weight | 4.9 Lbs [2.23 kgs] |
Ensures the amplifier is connected to the correct voltage and amperage for safe operation.
Recommends using appropriate circuits to prevent performance issues and safety hazards.
Safety guidelines for using the supplied power cord and accessibility.
Instruction to maintain grounding plug for electric shock prevention.
Warning against opening the unit due to shock hazard and voiding warranty.
Guidance on placing the unit on a firm, level surface for proper operation.
Ensures proper airflow by not blocking fan vents for cooling and longevity.
Explains the FET-driven preamp technology for harmonic content and tone.
Details on using the active EQ for fine-tuning sound with small adjustments.
Describes the contour control for scooping mids and boosting lows/highs.
Information on using Gain B for growl and Level B for volume control.
Usage of the balanced direct output for PA and recording consoles.
Function of the limiter to prevent power amp distortion at high volumes.
Instructions to ensure proper airflow and avoid blocking fan vents.
Procedure for safely disconnecting and moving the amplifier.
Guidance on cleaning the unit using a dry cloth and avoiding harsh chemicals.
Recommendation to save original packaging for future shipping or repairs.
Overview of the amplifier's design for performance and portability.
Technical details on the unique bass-specific equalization design.
Technical explanation of the contour control's shaping response.
Explanation of the Gate Induced Valve Effect technology in the preamp.
Details on the temperature-sensitive fan cooling system for reliability.
Description of circuitry protecting against operating condition faults.
Concluding remarks and contact information for feedback.
To Next Page
