Need help?Do you have a question about the Gallien-Krueger MB150S and is the answer not in the manual?
General| Type | Bass Amplifier |
|---|---|
| Power Output | 150 Watts |
| Impedance | 8 Ohms |
| Speaker Configuration | 1x12" |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4", 1 x XLR |
| Controls | Gain, Master |
| EQ | 3-band |
| Effects | Contour |
Details amplifier output power and impedance specifications.
Specifies headphone output characteristics and impedance.
Provides the signal-to-noise ratio measurement for the unit.
Details the frequency ranges and adjustment levels for EQ.
Describes the low-cut filter specifications and its effect.
Details the contour filter characteristics and its tonal shaping.
Provides specifications for the hi-boost filter and its frequency response.
Lists various input and output impedance values for connectivity.
Specifies the chorus effect parameters for the MB/E model.
Provides physical dimensions and weight of the amplifier units.
Details the footswitch connection and control functions for MB/E.
Step-by-step guide for adjusting amplifier controls for optimal sound.
Procedure for connecting and preparing the MB150S for initial testing.
Steps to test the power supply and limiter functions of the MB150S.
Procedure for testing input signals and system gain on the MB150S.
Procedure for connecting and preparing the MB150E for initial testing.
Steps to test the power supply and limiter functions of the MB150E.
Procedure for testing input signals and system gain on the MB150E.
To Next Page
