Need help?Do you have a question about the Gallien-Krueger MBCOMBO and is the answer not in the manual?
General| Type | Bass Combo Amplifier |
|---|---|
| Speaker Configuration | 1x12" |
| Effects Loop | Yes |
| Limiter | Yes |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4", 1 x XLR |
| EQ | 4-band |
| Effects | Contour Switch |
Crucial warnings about electric shock, fire hazards, and hearing damage from high sound pressure levels.
Ensuring the amplifier is configured for the correct line voltage and amperage for safe operation.
Recommendations for connecting to suitable AC circuits to ensure performance and prevent hazards.
Guidance on using the correct power cord and accessibility for safety.
Importance of proper grounding to prevent electric shock and avoid adapters.
Warning against opening the enclosure due to shock hazard and warranty voiding.
Instructions for proper placement and connecting/disconnecting cables safely.
Requirements for adequate ventilation and avoiding extreme environmental conditions.
Initial steps for powering on the amplifier, connecting the power cord.
Recommended starting positions for EQ, gain, and volume controls for different models.
Connecting the instrument using a shielded cable and setting bass controls.
Adjusting input gain and master volume for desired sound level and clarity.
1/4" input for instruments with passive electronics using a shielded cable.
1/4" input for instruments with active or higher output electronics.
Sets preamp gain after the input stage, used with input pad for headroom.
Description of the contour circuit's effect on EQ shaping, boosting lows/highs and cutting mids.
To Next Page
