Do you have a question about the Gallien-Krueger MB115 and is the answer not in the manual?
output power | 350W @ 8 Ohms (internal) |
---|---|
output power with extension | 500W @ 4 Ohms |
power requirements USA/Canada | 120V/60Hz, 580W (full power), 75.6W (average power) |
power requirements Europe | 230V/50Hz/60Hz, 580W (full power), 75.6W (average power) |
power requirements Japan | 100V/50Hz, 580W (full power), 75.6W (average power) |
maximum input level | 0.6V Rms |
---|---|
input impedance | 1M Ohms |
direct output impedance | 500 Ohms |
aux-in input impedance | 100K Ohms |
bass equalization | +/-10dB @ 60Hz |
---|---|
lo-mid equalization | +6dB/-10dB @ 250Hz |
hi-mid equalization | +6dB/-10dB @ 1KHz |
treble equalization | +/-14dB @ 7KHz |
contour filter | +2dB @ 50Hz/ -10dB @ 500Hz |
noise level | -90 dB reference to 500W/350W, “A” Weighted |
---|---|
amplifier protection | Full short circuit, thermal and RF protection |
stability | Stable into reactive and mismatch loads |
height | 23" |
---|---|
width | 19" |
depth | 14" |
weight | 33 lbs |
output power | 500W @ 4 Ohms |
---|---|
power requirements USA/Canada | 120V/60Hz, 580W (full power), 75.6W (average power) |
power requirements Europe | 230V/50Hz/60Hz, 580W (full power), 75.6W (average power) |
power requirements Japan | 100V/50Hz, 580W (full power), 75.6W (average power) |
maximum input level | 0.6V Rms |
---|---|
input impedance | 1M Ohms |
direct output impedance | 500 Ohms |
aux-in input impedance | 100K Ohms |
bass equalization | +/-10dB @ 60Hz |
---|---|
lo-mid equalization | +6dB/-10dB @ 250Hz |
hi-mid equalization | +6dB/-10dB @ 1KHz |
treble equalization | +/-14dB @ 7KHz |
contour filter | +2dB @ 50Hz/ -10dB @ 500Hz |
noise level | -90 dB reference to 500W, “A” Weighted |
---|---|
amplifier protection | Full short circuit, thermal and RF protection |
stability | Stable into reactive and mismatch loads |
height | 26" |
---|---|
width | 19" |
depth | 14" |
weight | 37 lbs |
output power | 200W @ 4 Ohms |
---|---|
power requirements USA/Canada | 120V/60Hz, 240W (full power), 48.6W (average power) |
power requirements Europe | 230V/50Hz/60Hz, 240W (full power), 48.6W (average power) |
power requirements Japan | 100V/50Hz, 240W (full power), 48.6W (average power) |
maximum input level | 0.6V Rms |
---|---|
input impedance | 1M Ohms |
direct output impedance | 500 Ohms |
aux-in input impedance | 100K Ohms |
bass equalization | +/-10dB @ 60Hz |
---|---|
lo-mid equalization | +6dB/-10dB @ 250Hz |
hi-mid equalization | +6dB/-10dB @ 1KHz |
treble equalization | +/-14dB @ 7KHz |
contour filter | +2dB @ 50Hz/ -10dB @ 500Hz |
noise level | -90 dB reference to 200W, “A” Weighted |
---|---|
amplifier protection | Full short circuit, thermal and RF protection |
stability | Stable into reactive and mismatch loads |
height | 23" |
---|---|
width | 19" |
depth | 14" |
weight | 35 lbs |
output power | 200W @ 4 Ohms |
---|---|
power requirements USA/Canada | 120V/60Hz, 240W (full power), 48.6W (average power) |
power requirements Europe | 230V/50Hz/60Hz, 240W (full power), 48.6W (average power) |
power requirements Japan | 100V/50Hz, 240W (full power), 48.6W (average power) |
maximum input level | 0.6V Rms |
---|---|
input impedance | 1M Ohms |
direct output impedance | 500 Ohms |
aux-in input impedance | 100K Ohms |
bass equalization | +/-10dB @ 60Hz |
---|---|
lo-mid equalization | +6dB/-10dB @ 250Hz |
hi-mid equalization | +6dB/-10dB @ 1KHz |
treble equalization | +/-14dB @ 7KHz |
contour filter | +2dB @ 50Hz/ -10dB @ 500Hz |
noise level | -90 dB reference to 200W, “A” Weighted |
---|---|
amplifier protection | Full short circuit, thermal and RF protection |
stability | Stable into reactive and mismatch loads |
height | 18" |
---|---|
width | 16" |
depth | 14" |
weight | 28 lbs |