Gamko E3 - Fitting Storage Shelves; Power Supply

Fitting storage shelves
1 Hook pin into the opening of the rail and
push bottom part towards the side.
4 Place the storage shelf, sliding the pins in the openings.
3 Fit the other pins at the same height.
2 This causes the pin to slot into the
 nextopeningintherail.
• Ifthisdevice’scableisdamageditmustbereplacedwithanoriginalcablesuppliedbythemanufacturer
• Incaseofemergency:isolatefrompowersupply.
• Thesocketshouldbewithineasyreachofthecabinet.
• Checkforthecorrectpowersupply,referredtotheinformationonthetypeplate.
• Ensurethatthemainsleadcannotbetrappedorsnagged.
• Ifnecessarythemainsleadcanbeextendedbyaqualiedelectrician.
• Wedonotrecommendtheuseofanextensionlead.
Power supply
Fluctuations in the power supply can cause damage, which causes the cabinet to switch o.
Gamko cannot be held responsible for any consequential damage.
28
E3