11
PATHFINDER AWL
Once the awl is inserted, pull the handle of
the awl outward while holding the tip section
in place, leaving the outer sheath in the
grommet hole.
Insert the end of the string into the center of
the sheath.
While holding pressure on the string, slowly
pull the sheath out of the grommet hole to
leave the end of the string exposed.
The stringing machine includes the Path-
finder stringing awl which creates a pathway
between or around strings to make inserting
a string through tight grommets easier and
quicker.
Insert the awl through the grommet hole in
the same manner as for traditional awls.
The Pathfinder awl must be in the closed
position before insertion.
To Next Page
Loading...
