29
Click the Auto Update All button. A window appears giving information on what version of firmware is
currently installed, and what version will be installed. The install process starts automatically. After all the
relevant firmwares are updated, a window appears confirming the process is complete and successful.
Click the OK button. The instrument is now ready to be used.
Select And Update
The Select And Update button is available at all times, even if an update is not required. Gamry
recommends not altering the firmware if it is not necessary. This tool allows you to change individual
firmwares (instrument, PLD, Comm).
Blink Button
Clicking the Blink button causes the Power LED on the selected instrument to blink five times. This may
help you identify the specific instrument chosen in the software from among a bank of similar-looking
potentiostats.
Changing the Label
If you purchase additional Gamry application software, you can do so using the Framework Instrument
Manager. The dialog box also allows you to change the Label for your device:
1. In Framework, choose Options.
A drop-down menu appears.
2. Choose Instrument Manager….
The Instrument Manager window appears.
3. Click the instrument whose label you wish to change, to highlight that instrument.
To Next Page
Loading...
