Need help?Do you have a question about the Gamry Reference 3000 and is the answer not in the manual?
Covers checking for shipping damage and understanding product safety standards.
Details AC power connection, grounding procedures, and operation with earth-grounded cells.
Addresses temperature, ventilation, defects, abnormal stresses, and environmental limits.
Covers cleaning, service, RFI, ESD sensitivity, CE, and RoHS compliance.
Covers initial visual inspection and determining the physical location for the instrument.
Details computer system requirements and the process for installing Gamry software.
Guides through initial power-up testing, USB cabling, and front panel LEDs.
Explains installing device drivers and running the Gamry Framework.
Details using the Instrument Manager for configuration, firmware, and authorization.
Explains the steps for DC, AC, and low I range DC calibration of the instrument.
Introduces cell connectors, cable types, ancillary apparatus, and AE connections.
Details connections for Normal, ZRA, Stack, and Membrane cell types.
Explains the purpose of fuses in cell cables and how to test for open fuses.
Covers checking for shipping damage and understanding product safety standards.
Details AC power connection, grounding procedures, and operation with earth-grounded cells.
Addresses temperature, ventilation, defects, abnormal stresses, and environmental limits.
Covers cleaning, service, RFI, ESD sensitivity, CE, and RoHS compliance.
Covers initial visual inspection and determining the physical location for the instrument.
Details computer system requirements and the process for installing Gamry software.
Guides through initial power-up testing, USB cabling, and front panel LEDs.
Explains installing device drivers and running the Gamry Framework.
Details using the Instrument Manager for configuration, firmware, and authorization.
Explains the steps for DC, AC, and low I range DC calibration of the instrument.
Introduces cell connectors, cable types, ancillary apparatus, and AE connections.
Details connections for Normal, ZRA, Stack, and Membrane cell types.
Explains the purpose of fuses in cell cables and how to test for open fuses.
General| Voltage Range | ± 10 V |
|---|---|
| Current Range | ± 1 mA to ± 10 A |
| Input Impedance | 10^12 Ω |
| Maximum Current | ±3 A |
| Current Resolution | 1 pA |
| Type | Potentiostat/Galvanostat |
| Frequency Range | 10 μHz to 1 MHz |
| Communication | Ethernet |
| Interface | Ethernet |
| Dimensions | 17.5 x 13.5 x 5.5 in (44.5 x 34.3 x 14 cm) |
To Next Page
