3. Align the manuscript to match the appropriate paper size.
• If the manuscript does not match with any size marker, please align the upper-left
corner of the manuscript with the arrow.
• Make sure there is no document in the ADF. If a document is detected in the ADF, it will
be more preferential than that on glass platen.
• Please put the paper or document on the scanner glass after the glue, ink or
correction fluid are completely dried.
• Rough textured, uneven, oil stained and extremely smooth paper will make printing
effect poor.
• Please make sure that there is no dust, fluff, etc. on the paper.
• Paper shall be put on a flat surface and stored under a cool and dry environment.
• To avoid influencing the definition, please don’t open the scanner cover during
scanning with the platen.
To Next Page
Loading...
Need help?
General
