Need help?Do you have a question about the Ganz ZN-B2MTP and is the answer not in the manual?
General| Night Vision | Yes |
|---|---|
| Resolution | 1920 x 1080 |
| Focal Length | 2.8mm |
| IR Distance | 30m |
| Video Compression | H.264/H.265 |
| Power Supply | DC 12V |
| Night Vision Range | 30m |
| Operating Temperature | -30°C to +60°C |
| Image Sensor | 1/2.8" progressive scan CMOS |
How to access the camera using a web browser, including default login credentials.
Instructions for configuring router/firewall to access the camera remotely.
Steps to adjust the camera lens position, zoom, and focus for optimal image quality.
Explanation of buttons and functions available on the camera's live view interface.
Explanation of RTP, RTSP, UDP, and Unicasting/Multicasting protocols.
Guidance on selecting protocols like RTP+RTSP and RTP/RTSP/Multicasting.
Configuration for enabling or disabling the analog video output from the camera.
Tools for adjusting H.264 settings and controlling video bit rate.
Details on video output resolution, frame rates, and GOP size.
Settings for limiting bandwidth and maximum bandwidth usage.
Adjusting exposure mode, AGC gain, and shutter speed for optimal image capture.
Configuration for automatic or scheduled switching between day and night modes.
Settings for adjusting white balance based on lighting conditions.
Adjusting brightness, sharpness, contrast, and color for image properties.
Fine-tuning zoom, focus, and iris settings for the camera lens.
Enabling/disabling audio, selecting codec, and adjusting mic/speaker volumes.
Connecting line-level audio sources and adjusting input gain.
Configuring live view protocol, buffering time, and OSD settings.
Setting up masked areas to hide sensitive parts of the video feed.
Settings for overwriting, mounting, and unmounting the SD card.
Configuring the camera to store still images based on events like alarm or motion.
Setting up periodic saving of still images to the SD card at defined intervals.
Setting up connection details for an external FTP server for file transfer.
Configuring FTP uploads of snapshots triggered by events like alarms or motion.
Setting up periodic FTP transmission of still images.
Configuring alarm inputs and outputs for external devices and triggering events.
Configuring motion detection zones and sensitivity to generate alarm events.
Setting up tamper detection to trigger alarms when the camera is obstructed or moved.
Defining conditions for events to trigger actions like alarm out or email notifications.
Setting static or DHCP IP addresses and DNS server information.
Process for assigning IP addresses using the MultiUpgradeTool.
Configuring HTTP and RTSP port numbers for network communication.
Setting up RTP port ranges and multicast parameters for video streams.
Configuring email alerts for events and errors, including server details.
Setting up Dynamic DNS for remote access using a hostname.
Enabling Universal Plug and Play for automatic network discovery.
Creating, modifying, and managing user accounts and passwords.
Configuring the camera's date, time, and time zone settings.
System reboot, factory default reset, and firmware upgrade procedures.
Viewing camera software version, MAC address, and network configuration details.
To Next Page
