Need help?Do you have a question about the Ganz ZN1-M3FN3 and is the answer not in the manual?
General| Model | ZN1-M3FN3 |
|---|---|
| Resolution | 1920 x 1080 |
| Day/Night | Yes |
| Audio Compression | G.711 |
| Power Consumption | 5W |
| Ingress Protection | IP66 |
| Lens | Fixed |
| Night Vision | Yes |
| Category | Security Camera |
| Wide Dynamic Range | Yes |
| Video Compression | H.264 |
| Ethernet | 10/100Mbps |
| Protocols | TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, SMTP, NTP, UPnP |
| Operating Temperature | -30°C ~ 60°C |
| Power | DC12V |
| Power Supply | 12VDC or PoE |
Step-by-step guide for mounting the camera body and dome cover.
How to tilt, pan, and rotate the camera lens for optimal viewing.
Configuring image settings like brightness, contrast, and saturation via the camera's webpage.
Details on connecting the camera via RJ45 LAN for Ethernet and PoE.
Guidelines for setting up the network environment and identifying the device's IP address.
Accessing live video streams and configuring settings through a web browser.
Instructions for installing the necessary ActiveX software for web viewing.
Method to view video streams and manage devices using the IPAdminTool.
Procedures for performing a soft reset on the camera device.
Steps to restore the camera to its original factory default configurations.
Guidance on recovering the device from safe mode and updating firmware.
To Next Page
